outback breakers [RE-wrenches]
David Nixon
david.nixon at arisetech.com
Thu Feb 24 08:50:52 PST 2005
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Get a FREE* 5 Megapixel Digital Camera - yours to keep!
http://click.topica.com/caadazlbz8Qcsbz9JC9a/5 Megapixel Digital Camera Promotion
-------------------------------------------------------------------
Just a point of intrest on CBI breakers.
CBI breakers are made in South Africa, and as such have a european
electrical heritage. Therefore the screw terminal is of the "Posi drive"
design. This is very similar to a Philips drive. The reaction of most
peolple to "posi" is it is just a slopy fit and generaly a philips
screwdriver will do. I used to work in a panel shop (IBEW) where we used
posidrive screwdrivers exclusively on all European electrical equipment,
they work very well.To Identify a posi screw look for four small dots or
score marks radiating from the centre of the screw between the cross of
the "philips". The best driver is a "Weidmuller" 900854 PZ2, a close
second is the "Cresent" tools PZD2. Also look out for these screws on
"ABB" breakers used in european inverters and in other high voltage
applications.
David Nixon
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Is your computer freezing up or slowing down?
Repair corrupt files and harmful errors - protect your PC Take a
2-minute PC health check-up at no charge!
http://click.topica.com/caaddztbz8Qcsbz9JC9f/PC Powerscan
-------------------------------------------------------------------
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list