Hydro & Outback [RE-wrenches]
Bob-O Schultze, Electron Connection
econnect at snowcrest.net
Wed Feb 16 08:11:24 PST 2005
<x-flowed>
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Is your computer freezing up or slowing down?
Repair corrupt files and harmful errors - protect your PC Take a
2-minute PC health check-up at no charge!
http://click.topica.com/caadaSrbz8Qcsbz9JC9a/PC Powerscan
-------------------------------------------------------------------
Most hydroplant manus will wind their stators to
output 120-200 vac if you ask. You transmit 3ø up
the hill (an extra wire, but only 2/3rd the
current on any given wire) and step down through
a 3ø transformer wound on the same core and
usually configured delta/delta. Since you should
be able to calculate the frequency based on the
Head (RPM) you can have the Xformer made for that
frequency range. Pretty darn efficient. Run the
secondary wires through a set of diode bridges
(very well heat sunk) and there you go.
Bob-O
>Keith,
>
>Ask Bob-O about this. He uses custom wound transformers at each end to
>lower the
>wire size. Bob-O, can you detail this for the list?
>
>Todd
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Click here and get your free* stock car racing gift.
http://click.topica.com/caac8uabz8Qcsbz9JC9f/PermissionData
-------------------------------------------------------------------
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list