Repairing module back [RE-wrenches]

[Bill Brooks]

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Click here and get your free* stock car racing gift.
http://click.topica.com/caac2NQbz8Qcsbz9JC9a/PermissionData
-------------------------------------------------------------------

Tom,

If it hasn't been approved for use with Tedlar, I wouldn't recommend it. It
may protect the circuit and dissolve the Tedlar. Polymers are strange
animals-that's why manufacturers are very particular about what they
recommend.

Bill.

-----Original Message-----
From: Tom Lane, Energy Conservation Services [mailto:tom at ecs-solar.com] 
Sent: Thursday, January 06, 2005 1:58 PM
To: RE-wrenches at topica.com
Subject: Re: Repairing module back [RE-wrenches]

Repairing Module Backs:

RTV silicone has been an industry standard.  But "Liquiguard", which can be
found at www.liquiguard.com is a unique, clear, flexible, durable protective
coating that you can spray on a circuit board, and even throw it in the
ocean and it will still be protected.  Then put an exterior duct tape over
the area sprayed. gator tom

----- Original Message ----- 
From: "William Miller" <wrmiller at slonet.org>
To: <RE-wrenches at topica.com>
Sent: Thursday, January 06, 2005 1:11 PM
Subject: Repairing module back [RE-wrenches]

Friends:

We have in stock a Shell module that has a back that was scraped by
fork-lift forks somewhere in transit.  I'd like to repair this module and
offer it to a client that could really use it.  Does anyone have experience
in repairing the back skin of a Shell module?  Any advise is appreciated.

Thanks again to all of you and to Michael Welch and HP for this forum.

William Miller

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Like music?  Get a CD player on us. Click here.
http://click.topica.com/caac2NUbz8Qcsbz9JC9f/PermissionData
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------