DR with 288Hz from UPS load. [RE-wrenches]
Wallace Stahle
wstahle at pacific.net
Mon Nov 14 21:34:21 PST 2005
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Is your computer freezing up or slowing down?
Repair corrupt files and harmful errors - protect your PC
Take a 2-minute PC health check-up at no charge!
http://click.topica.com/caaeatrbz8Qcsbz9JC9a/PC PowerScan
-------------------------------------------------------------------
Greetings Wrenchs,
I was recently asked to trouble shoot an existing off grid installation
where the owner keeps a short leash on system improvements and decides what
needs doing. They have a DR 3624 that feeds a small home with computer and
Satellite modem which are backed up by a 500 watt APC UPS as they often
lose power to low battery<small array and too many loads.
("I dont need a Trimetric", and were not using much power")
So in listening to the DR hum and grind in tortured noise I checked out the
Hz and was amazed to find 288+ and 311+ Hz on two different meters. I traced
it down to the UPS. It seems to
Is it superimposed over the 60Hz or is it driving the DR at that Freq?
What are the consequences to the DR or loads with that kind of freq?
The unit behaves normally with AC input or as Inverter with the UPS
disconnected
It was bench tested and checked out fine.
Any engineering insights into cause and effect of this is appreciated.
Thanks,
Wallace Stahle
Future Electric Energy Co.
P O Box 236
Willits, CA 95490
Lic# C10-762093
future at pacific.net
707-459-0474
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Oprah vs Dr. Phil- who is your favorite? Vote now.
http://click.topica.com/caaeatsbz8Qcsbz9JC9f/Your opinion
-------------------------------------------------------------------
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list