Breaker-breaker [RE-wrenches]
Matt Tritt
solarone at charter.net
Sun Nov 7 09:58:09 PST 2004
<x-flowed>
Hi Doug,
Yeah, I know only too well the Hell-Electric of coastal CR, but this place
is a little different from the ususal mess because of the wood-lined inner
pantry that holds the equipment. This space is kept de-humidified 24/7 by a
large bank of lights, thanks to the big hydro set's output.
They're emailing me some digitals of the entire system but, from what I've
been told, even the old DR is totaly rust free, as is everything else in the
room. Can you believe it?
I might take your advice about the new panel anyway if I can't find a
replacement for the $#*?!^ breaker. 25 years is pretty old for certain
brands of equipment, notably Cutler Hammer.
You know that December is "dry season" down there, so maybe there won't be
as many gargantuan banana spiders trying to share my bunk!
Matt T
----- Original Message -----
From: "Doug Pratt" <dmpratt at sbcglobal.net>
To: <RE-wrenches at topica.com>
Sent: Saturday, November 06, 2004 8:51 PM
Subject: RE: Breaker-breaker [RE-wrenches]
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Amazing Diet Patch
The fastest - Easiest way to lose weight! Try it now FREE!
http://click.topica.com/caacOlIbz8QcsbadqCja/MyDietPatches
-------------------------------------------------------------------
Matt- given the corrosive rain forest environment in Costa Rica, and the
relatively low cost of breakers and panel boxes (compared to getting you
on-site), I'd be pretty tempted to simply pack a new breaker panel and
breakers when you go. Sounds like a poor connection between the bus bars
and breaker. In this environment, and since it's the main breaker
handling a lot of amperage, I wouldn't be surprised to find the bus bars
pretty well eaten.
Enjoy the trip you poor boy :)
Cheers,
Doug
-----Original Message-----
From: Matt Tritt [mailto:solarone at charter.net]
Sent: Saturday, November 06, 2004 11:03 AM
To: RE-wrenches at topica.com
Subject: Breaker-breaker [RE-wrenches]
Fellow Watt heads,
I have a client in the wilds of Costa Rica who called this morning with
a breaker problem. She has a 25 year old 15 kW hydro system (AC), a 10
year old DR and some kind of 8 kW Diesel genset that eventually feed a
breaker panel, which is well protected from the massively corrosive
environment inside a concrete bodega with a heated wooden inner storage
room. They system works flawlessly, except for the building panel.
There is no evidence of rust or any other corrosion in this room but the
main breaker, which I'm told is a Cutler Hammer E55-96 two pole 230
unit, only works after "moving it around with a screwdriver". Ahem.
The wires appear to be in good shape feeding this breaker and the
breaker itself seems solidly fixed with no signs of cracks or chips.
The problem is that (if they are giving me the right numbers off the
device) I can't seem to find any corresponding model numbers or anything
even close. I'm told that the only other number on this unit is the
spec. number LK 3227.
Any ideas???? I have to head down there pretty soon to perform some
exploratory surgery on a number of systems in the area, so I need to
locate a part or source of parts ASAP. Any suggestions would be greatly
appreciated!
Matt T
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Free recipes to get you in shape
http://click.topica.com/caacOlCbz8QcsbadqCjf/PermissionData
-------------------------------------------------------------------
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages:
http://lists.topica.com/lists/RE-wrenches/read
List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: re-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list