Battery Cycle Life Ratings [RE-wrenches]

Jay Peltz, Peltz Power jay at asis.com
Fri Nov 5 22:26:48 PST 2004


 

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Free recipes to get you in shape
http://click.topica.com/caacOlCbz8Qcsbz9JC9a/PermissionData
-------------------------------------------------------------------

HI Bruce,

I use the higher setting on all my systems.  I find that the batteries have
better storage, and last longer.

jay

Peltz power


>
> Hi Jay,
>             Was the genset their only charging source?  The problem I find
> with relying on gensets as the primary charging source is that run times
are
> never long enough to get a full charge because of the way charging rate
> tapers off.  Something like 70% run time to get the last 20% of charge in.
> Very inefficient use of fuel.  If this was the case using the higher bulk
> charge level would be perfectly justified.  I would not be comfortable
using
> it on a system with renewable sources though.
>
> Cheers,
> Bruce
>
> Your free subscription is supported by today's sponsor:
> -------------------------------------------------------------------
> Get your Golden Tee CD ROM on us
> http://click.topica.com/caacOlvbz8QcsbAmaYif/PermissionData
> -------------------------------------------------------------------
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages:
http://lists.topica.com/lists/RE-wrenches/read
>
> List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php
>
> Check out participant bios: www.mrsharkey.com/wrenches/
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
>
>
>
>
>

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Save up to 67% on Omaha Steaks + Get 6 FREE Burgers and a 
FREE Cutlery Set + Cutting Board!
http://click.topica.com/caacOlKbz8Qcsbz9JC9f/OmahaSteaks
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------






More information about the RE-wrenches mailing list