Dead Kyocera module [RE-wrenches]

Matt Tritt solarone at charter.net
Tue Oct 12 08:19:51 PDT 2004


<x-flowed>
 

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Save up to 67% on Omaha Steaks + Get 6 FREE Burgers and a 
FREE Cutlery Set + Cutting Board!
http://click.topica.com/caacHOXbz8Qcsbz9JC9a/OmahaSteaks
-------------------------------------------------------------------

  Bob-O and others,

  Keeping in this vein, does anyone have a lead on a couple J51s or 48s? One 
of my clients insists on staying with an old system made up of 4 J51s on a 
Zomeworks 6 panel tracker.

  Gee, I wonder why they run their generator so much?

  Matt T
  ----- Original Message ----- 
  From: "Bob-O Schultze, Electron Connection" <econnect at snowcrest.net>
  To: <RE-wrenches at topica.com>
  Sent: Tuesday, October 12, 2004 8:08 AM
  Subject: RE: Dead Kyocera module [RE-wrenches]




  Your free subscription is supported by today's sponsor:
  -------------------------------------------------------------------
  Like music? Get a CD Player here
  http://click.topica.com/caacJzebz8QcsbadqCja/PermissionData
  -------------------------------------------------------------------

  Dave,
  I've had a small number of those J48s go hooey as well.
  Most of mine had a circular browning on the face of the module caused
  by the J-box. I assume that is where the string contacts failed.
  They make a nice coffee table or wall art, but aside from that....
  Good Luck, bob-O

  >Recently serviced an old job and found a Kyocera module gone kaput. .05
  >volts OC, zero amps SC.
  >Was part of a 10 module 12v array. All other modules putting out power
  >within 10% to 12% of 16.7V and 2.88 Amps.
  >It is a LA361 J48 Kyocera module. 48 watts. Made in 1990 so no warranty 
(ten
  >yrs at that time).
  >No visible signs of problems.
  >
  >Any ideas on what the problem could be? And how to correct it?
  >
  >Dave

  Your free subscription is supported by today's sponsor:
  -------------------------------------------------------------------
  Is America Safe? Give your opinion on Homeland Security and enter
  to win!
  http://click.topica.com/caacHM9bz8QcsbadqCjf/PermissionData
  -------------------------------------------------------------------

  - - - -
  To send a message: RE-wrenches at topica.com

  Archive of previous messages: 
http://lists.topica.com/lists/RE-wrenches/read

  List rules & etiquette: www.mrsharkey.com/wrenches/etiquete.htm

  Check out participant bios: www.mrsharkey.com/wrenches/

  Hosted by Home Power magazine

  Moderator: michael.welch at homepower.com

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Click here for your Golden Tee CD ROM
http://click.topica.com/caacJzobz8Qcsbz9JC9f/PermissionData
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: re-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------







</x-flowed>



More information about the RE-wrenches mailing list