Shading (was MX60 question) [RE-wrenches]

Darryl Thayer daryl_solar at yahoo.com
Sun Sep 26 01:16:20 PDT 2004


 

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Is Gay Marriage a Civil Rights Issue? Click here and win.
http://click.topica.com/caacDvRbz8Qcsbz9JC9a/PermissionData
-------------------------------------------------------------------

Hi Mark
excellent job.  I have done a similar test using a
parallel set, I got very similar results, however once
I thought I understood the problem I did not do the
detail you did.  However I think there was a
difference in when I shaded say 1/2 of one cell, such
as the shadow of leaves, and the MPPT seemed to help
correct.  The simple case of total blockage of one
cell you are correct.  

I wish I had gone the extra mile to figure it out.
Thanks Daryl

--- Mark Byington <markbyington at sbcglobal.net> wrote:
> "Has anyone done a similar shaded modules comparison
> with SMA or other
> non-battery inverters?"
> 
> >From my previous post 3/23/04
> We have done a small experiment by shading various
> sections of a PV array, and measuring the array
> output power to convince ourselves that the bypass
> diodes in the modules do allow the rest of the
> module or the rest of the array to produce power
> when one section is shaded.  P.S. If you don't want
> to sort through all the data, just skip down to the
> Conclusions section at the bottom.


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Do you love your country? Get a Free USA T SHIRT click here to 
receive your gift.
http://click.topica.com/caacDvPbz8Qcsbz9JC9f/PermissionData
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------





More information about the RE-wrenches mailing list