MX60 question [RE-wrenches]
Kurt Nelson
sunwise at cheqnet.net
Tue Sep 21 16:16:50 PDT 2004
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Race to Claim your FREE Stock Car Racing Gift!
http://click.topica.com/caacERRbz8Qcsbz9JC9a/PermissionData
-------------------------------------------------------------------
Christopher Freitas wrote (regarding higher voltage arrays):
the losses in the wiring are less and the PV array
will start charging slightly earlier and will work better under
partially shaded conditions and when subjected to high ambient
temperatures.
Hey Christopher,
Can you explain the partial shading a little better? It seems
counterintuitive to me. If you have all modules for a given array wired
in parallel and one module is shaded, you only loose the output on that
one module. If you have the same array with all the modules wired in
series and you shade one, you impact on the output of the entire array
(or half the array if, for instance, two paralleled series strings).
Thanks -- Kurt Nelson
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Is Unemployment on the rise? Answer and Win!
http://click.topica.com/caacERJbz8Qcsbz9JC9f/PermissionData
-------------------------------------------------------------------
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & etiquette: www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list