pre-engineered ground racks [RE-wrenches]

Marco Mangelsdorf marco at pvthawaii.com
Fri Jul 23 18:06:06 PDT 2004


 

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Save up to 67% on Omaha Steaks + Get 6 FREE Burgers and a 
FREE Cutlery Set + Cutting Board!
http://click.topica.com/caacpgjbz8Qcsbz9JC9a/OmahaSteaks
-------------------------------------------------------------------

Jerry,

I'd go with Stan Ulman and his Professional Solar Products ground-mount
hardware (www.prosolar.com).  Stan has done all the necessary engineering
for his mounting hardware and is a very helpful guy to deal with.  (And, no,
I don't work for PSP.)  Aside from the anodized al. rails and other hardware
he supplies, you would be using 1 1/4" gal. pipe as posts sunk in concrete
every 10'.  His phone: 800 847-6527.

aloha,
marco
ProVision Technologies, Inc.
Hilo, Hawai'i

-----Original Message-----
From: Jerry Caldwell [mailto:solarcowboy at yahoo.com]
Sent: Friday, July 23, 2004 2:58 PM
To: RE-wrenches at topica.com
Subject: pre-engineered ground racks [RE-wrenches]

Wrenches,

I need to quote a PV system with a ground rack on the
side of a hill.  I'm thinking about going with a
pre-engineered system like Unirac to save time both
with design and installation.  Does anyone have
experience with Unirac's large ground rack product or
anyone else's for that matter.  Basically, I'm looking
for opinions pro or con using a kit system for this
application vs. building our own with galvanized pipe
& strut.

cheers,

=====
Jerry Caldwell
NABCEP Certified PV Installer
Light Energy Systems
965 Detroit Ave
Concord, CA

925-680-4343 office
510-205-2798 mobile

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Apply now for a No-Annual-Fee Discover® Platinum Card 
0% Intro APR*, No Annual Fee, Up to 2% Cashback Bonus® 
award* Start Saving Today – APPLY NOW! It's fast, easy and 
secure.
http://click.topica.com/caacpgwbz8Qcsbz9JC9f/DiscoverCard
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------










More information about the RE-wrenches mailing list