square-wave inverter vs the world [RE-wrenches]
Allan Sindelar
allan at positiveenergysolar.com
Fri Jun 11 20:17:37 PDT 2004
-----------------------------------------------------------
Let University of Phoenix make 2004 your year. Evening,
weekend or FlexNet® classes over 130 locations. Look
into our programs and get the degree that gets you going!
http://click.topica.com/caaciq1bz8Qcsbz9JC9a/UOP
-----------------------------------------------------------
----- Original Message -----
From: "Ray Walters" <ray at solarray.com>
I know the list hates Mod square wave inverters, but I still use them all
the time for systems under $10,000. They work, they surge, their efficient,
and I have never lost any tools or equipment to the poor wave form in the 5
years of running my whole shop on a DR2424, nor have any of my customers
had any problems beyond some extra buzz. They definitely have their place.
I am using more of the SW plus series; when charging from a generator it
definitely is more efficient than a mod sine, but I have never been able to
get it to search below the 16 watt setting. Any other wrenches have a trick
to get the SW+ to search at the 8 watt setting as advertised?
We seldom use or design around mod-square unless cost is the predominant
decisionmaker.
Re the SW+ search...the unit in my own home is incapable of going to sleep
when set at 8W search. It is incapable of this even when the AC output
breaker is turned off. It may just be my early unit; I don't know, as I
haven't used any on customer systems. So you're not alone here, Ray.
Allan @+E
-----------------------------------------------------------
Give Your Team Access to Their PCs from Anywhere. Increase
productivity with a secure remote-access solution from
GoToMyPC Pro. Stay in touch with your office. FREE TRIAL:
http://click.topica.com/caaciqXbz8Qcsbz9JC9f/ExpertCity
-----------------------------------------------------------
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & etiquette: www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list