Final conclusion on metering? [RE-wrenches]

Kirk Herander, VSE kirk at vtsolar.com
Thu Feb 19 11:57:27 PST 2004


I just got my Form 12S, 120 v meter from Hieleah. From what they told me
this will work no problem. I have never gotten a standard 240 v 2S to work.
We've learned that the 2S can work if the coil is powered by 240v while
monitoring 120v, but wiring details are missing(Chris - more info please?).
Anyway, I hope the 12S solution works fine and we can end this perpetual
thread.

Kirk
Vermont Solar Engineering
Kirk Herander
North American Board of Certified Energy Practitioners
Certified Solar PV Installer(TM)
Xantrex Certified Dealer Charter Member
NYSERDA-eligible installer
Vermont Solar and Wind Partner

PO Box 697
Burlington, VT. 05402
www.vermontsolar.com
www.backeastsolar.com
800.286.1252 - 802.863.1202
fax 802.863.7908


> So - in distillation, there seemed to still be lingering questions about
the
> use of a single 240V 2s meter to measure 2 circuits at 120 with canceling
> etc. I have one post claiming success, others causing doubt.  I am about
to
> wire it up this way....

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------







More information about the RE-wrenches mailing list