Generator stuff [RE-wrenches]
Roy Butler, Four Winds RE
roy at four-winds-energy.com
Mon Oct 18 05:53:04 PDT 2004
<x-flowed>
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Claim your tickets to Universal Orlando now
http://click.topica.com/caacJzlbz8Qcsbz9JC9a/PermissionData
-------------------------------------------------------------------
Matt,
Run screaming from the showroom now! I had 3 systems which used that
same Generac unit and all 3 had frequent and annoying "glitches" . They
ranged from auto start unreliability, to waveform problems to over
regulation of the voltage.
We have some real good generator service guys out here who (after MANY
service calls) finally gave up on these machines. We came to the
conclusion that Generac may be great for it's intended purpose....home
standby....but they are sadly lacking for inverter system applications!
All 3 of these troubled system owners have now switched over to Onan
generators (15 to 20KW range) with great results.
FYI...we have 16 systems out there right now which use Onan
generators....very few problems over all.
Just my opinion......
--
Roy Butler
NABCEP Certified Solar PV Installer™
Four Winds Renewable Energy, LLC
8902 Route 46
Arkport, NY 14807
607-324-9747
www.four-winds-energy.com
NYSERDA eligible PV installer for PON 716
NYSERDA eligible wind installer for PON 792
Matt Tritt wrote:
>
>
>Your free subscription is supported by today's sponsor:
>-------------------------------------------------------------------
>Click here for your Golden Tee CD ROM
>http://click.topica.com/caacJzobz8QcsbAlljZa/PermissionData
>-------------------------------------------------------------------
>
>
>Off-grid cohorts,
>
>Has anybody had experience with the (gulp) Generac Elite Home Standby 15 kW vapor fuel 1800 RPM units? From the technical info they would seem to be a pretty good candidate to replace the sorely missed Kohler 12 RY liquid cooled unit.
>
>They even appear to use the same little Ford industrial 4 cylinder engine as the Kohler. The Elite model comes without the un-needed grid-sensing transfer switch.
>
>Very interesting but I really need some actual info on these things.
>
>Thanks in advance,
>
>Matt T
>
>[Non-text portions of this message have been removed]
>
>Your free subscription is supported by today's sponsor:
>-------------------------------------------------------------------
>Claim your tickets to Universal Orlando now
>http://click.topica.com/caacJzlbz8QcsbAlljZf/PermissionData
>-------------------------------------------------------------------
>
>- - - -
>To send a message: RE-wrenches at topica.com
>
>Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
>
>List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php
>
>Check out participant bios: www.mrsharkey.com/wrenches/
>
>Hosted by Home Power magazine
>
>Moderator: michael.welch at homepower.com
>
>
>
>
>
>
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Want to go on a Cruise for Free?
http://click.topica.com/caacIqObz8Qcsbz9JC9f/PermissionData
-------------------------------------------------------------------
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list