Selling tactic for MPPT [RE-wrenches]

Bob-O Schultze, Electron Connection econnect at snowcrest.net
Mon Aug 9 12:01:33 PDT 2004


<x-flowed>
 

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Amazing Diet Patch
The fastest - Easiest way to lose weight! Try it now FREE!
http://click.topica.com/caacvgtbz8Qcsbz9JC9a/MyDietPatches
-------------------------------------------------------------------

Gang,
Four 12V PVs in series-especially running into a MPPT controller, 
will pretty easily push the incoming voltage over the 48VDC rating of 
the QOs. Probably still work fine, but....
Bob-O


>  Assuming they're Siemens M50 modules, the
>manufacturer's  literature
>>clearly shows daisy chaining up to 4 modules. Then I would bring  the 2
>circuits into a 2 pole QO
>  >box indoors with 2 15 A breakers.

-- 
Bob-O Schultze, Electron Connection
PO Box 203, Hornbrook, CA 96044
800.945.7587 or 530.475.3402
fax 530-475-3401
www.electronconnection.com

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Save up to 67% on Omaha Steaks + Get 6 FREE Burgers and a 
FREE Cutlery Set + Cutting Board!
http://click.topica.com/caacvgpbz8Qcsbz9JC9f/OmahaSteaks
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------



</x-flowed>



More information about the RE-wrenches mailing list