SID circulators [RE-wrenches]
Jay Peltz, Peltz Power
jay at asis.com
Mon Jul 12 15:29:12 PDT 2004
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Save up to 67% on Omaha Steaks + Get 6 FREE Burgers and a
FREE Cutlery Set + Cutting Board!
http://click.topica.com/caacpgjbz8Qcsbz9JC9a/OmahaSteaks
-------------------------------------------------------------------
Hi Jeff,
Curious if you are using the pumps connected to copper pipe or plastic?
Have you tried any rubber isolation techniques?
jay
Peltz Power
>
> Hello wrenches,
>
> I have installed five el-SID battery direct pumps; four in a hydronic
> heating system and one in a sdhw system. The "virtually silent""extremely
> quiet" pumps make ticking and rattling noises which are readily amplified
by
> mounting hardware and wood framing.
>
>
> One pump was sent back to the manufacturer for testing and declared a
normal
> healthy sounding quiet pump.
>
> I did some static head testing with vertical tubing and pump. This
should
> have eliminated the possibilities of system air, cavitation, etc. as this
is
> how the manufacturer tests pumps.
>
> I concluded that with room temperature glycol the pump is relatively
quiet,
> with pure water ticking noises are audible, with an increase in
temperature
> the ticking increases and becomes a rattling, when then attached to wood
> framing the noise is broadcast through the entire structure.
>
> These conclusions do not seem to agree with other available info.
>
> Any comments concerning similar experiences or suggestions appreciated.
>
> Oscar
> Thirsty Lake Solar
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Get a Great Credit Card for You Today
You can find a credit card to fit your credit needs.
All types of credit cards -- 0% APRs, Rewards, & Bad Credit.
http://click.topica.com/caacpgdbz8Qcsbz9JC9f/411Web
-------------------------------------------------------------------
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & etiquette: www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list