Panel protection.... [RE-wrenches]
Carl Emerson, Free Power Ltd.
freepower at freepower.co.nz
Thu May 6 01:36:48 PDT 2004
<x-flowed>
===========================================================
Domains as low as $4.95!
Limited Time! ICANN Accredited GoDaddy!
http://click.topica.com/caaccM5bz8Qcsbz9JC9a/ GoDaddy
===========================================================
John,
I still have some Canon ASi panels without glass that are as tough as...
They have survived bullets in Northern Australia.
Might be the go ??
Cheers
Carl E.
John Veix wrote:
>
>Hi all,
>
>I've a remote local government body installation that uses 3 of BP4160H panels for the control of a water race. The panels are mounted on top of a small concrete building that has raised metal sides seemingly built to military standards. Very heavy metal, indeed.
>
>However, within a month of installation, the panels were wrecked by vandals throwing huge rocks at the panels surface.
>
>Although I will be installing 6mm (approx 1/4") thick polycarbonate over the panels to protect against the rock damage, is there anything else that can be done to avoid this happening. Short of installing a minefield or machine-gun nest, of course.
>
>Any known manufacturers that make a protective surface for panels?
>
>This is such a really good application, I don't want the local govt body becoming discouraged by idiots destroying it.
>
> thanks in advance, John Veix, Christchurch, N.Z.
>
>
[Non-text portions of this message have been removed]
===========================================================
Sponsor a child today through Children International.
Give a desperately poor child hope for a brighter future.
For only $18 a month you can make a difference!
http://click.topica.com/caaccM4bz8Qcsbz9JC9f/ Children's Int'l
===========================================================
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & etiquette: www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list