Off-ideal Array Tilt Output [RE-wrenches]

Bill Brooks billb at endecon.com
Sun Apr 4 20:28:33 PDT 2004


===========================================================
Let University of Phoenix make 2004 your year. Evening, 
weekend or FlexNet® classes – over 130 locations. Look 
into our programs and get the degree that gets you going!
http://click.topica.com/caab6aBbz8Qcsbz9JC9a/ UOP
===========================================================



Don and Allan,

The problem that Tim Townsend was having with PV Design Pro is that there is
a calculation bug in the program that overpredicts the impact of wire
losses. Essentially, if your wire losses are 2%, it will calculate them to
be 3 or 4%. This yields a more conservative production number which is
generally erring on the right side of safety. However, his point is that if
a bug is found, it should be fixed because it raises questions about the
code in general. I think most people that use the program have been happy
with it. However, if I used it (which I don't), I would feel much better if
the bug was removed.

Bill.

-----Original Message-----
From: Don Loweburg, Offline [mailto:i2p at aol.com]
Sent: Saturday, April 03, 2004 10:45 AM
To: RE-wrenches at topica.com
Subject: Re: Off-ideal Array Tilt Output [RE-wrenches]



===========================================================
MORTGAGE / REFINANCE RATES ARE LOW. ACT NOW!
3 Mortgage brokers compete for your business.
Great rates, no obligation, and easy form.
http://click.topica.com/caab6aabz8QcsbaaVcJa/ Insurance4usa.com
===========================================================


In a message dated 4/3/2004 10:20:44 AM Pacific Standard Time,
tony at appliedsolarenergy.com writes:
According to my calculations: (using the weather data for Albuquerque)
the annual total for tilt at 30 degrees, south is
5420 kwh (for a specific combination of panels and inverter)
and at tilt 26 degrees, azimuth 50 degrees west of south the annual total is
5002 kwh
so the relative performance is 92.3%.



I ran the simulation using PV Design Pro and got the result that the off
south orientation yields 93 % of true south yield.  So at least our software
yields similiar results, now for the real world.

In my experience the software is doing a good job for me predicting actual
vs
real output.


Tim Townsend has some issues with Design Pro and the way the program sizes
wire, but for me the real- theoretical is close enough --(a few percent
generally)

best, Don

[Non-text portions of this message have been removed]

===========================================================
Bounces like rubber! Shatters like ceramic! Discover Crazy
Aaron's Thinking Putty in grown up handfuls. It's the
creativity unleashing, mood enhancing desk toy!
http://click.topica.com/caab593bz8QcsbaaVcJf/ Crazy Aaron Enterprises
===========================================================


- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

===========================================================
Sign up to get FREE information from leading colleges!
Compare degrees, admissions, financial aid and more.
Study your career education options at 
Collegeinformation.info. 
http://click.topica.com/caab6aibz8Qcsbz9JC9f/ College Info
===========================================================


- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------









More information about the RE-wrenches mailing list