large -48VDC inverter recommendation [RE-wrenches]
Christopher Freitas --- OutBack Power
cfreitas at outbackpower.com
Tue Feb 24 18:54:52 PST 2004
The current draw of the inverter will be over 4000 amps at 48 vdc for a
180 kWAC inverter system - impressive. I know it is actually done in
the telcom world - just thought the current levels involved sounded
wild.
Technically, it is possible for us to do this with the OutBack FX series
- and we do plan on doing it - we just need to make a master control
unit out of an inverter control board and a AC board - we already have
the redundancy working in the present product (except that we use one FX
inverter as a master - all the slaves inverters can already be "hot
swapped" or shutdown without any issues. With a master control unit all
the inverters will operate as just slaves.
What is your the time frame required for the delivery?
You might talk with RMS electric in Boulder, Co - Mark or Jan - I know
they have sold some large telcom inverters in the past that were similar
(www.rmse.com).
Christopher
Kurt Albershardt wrote:
>
> I have a client looking for 150-180 kVA of 120-240V from their
> (existing) -48V telecom power plant. The Exeltech GX stuff is still not
> ready and I'm wondering what other options might be suitable to the task
> (low distortion, N+1 redundancy, alarming & monitoring via SNMP or
> similar.)
>
>
> --thanks
Christopher Freitas
OutBack Power Systems, Inc.
cfreitas @ outbackpower.com
www.outbackpower.com
Arlington WA USA
Tel 360 435 6030
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list