MX 60 for wind [RE-wrenches]

[Geoff Greenfield]

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Apply now for a No-Annual-Fee Discover® Platinum Card 
0% Intro APR*, No Annual Fee, Up to 2% Cashback Bonus® 
award* Start Saving Today – APPLY NOW! It's fast, easy and 
secure.
http://click.topica.com/caacpgwbz8Qcsbz9JC9a/DiscoverCard
-------------------------------------------------------------------

Seeing this marriage work would be a good thing I think... but will take a
lot of work.  One of the tricks will be to get the window wide enough... the
Bergey in low winds puts out voltage way below nominal 24VDC... that is
their "slow boost" circuit which I think is like a bank of caps (?) that
amass usable power and pop in a charge when they reach over the battery
voltage  enough...  Can MPPT work two ways?  I've always just paid attention
to it's step down ability.  It would be great to have an option to use
Bergeys in a 48 v nominal system

Sincerely,

Geoff Greenfield
NABCEP Certified Solar PV Installer TM
GLREA Certified Photovoltaic Systems Integrator/Installer License Number
0211-01

THIRD SUN SOLAR AND WIND POWER Ltd.
340 West State Street, Unit 25
Athens, OH 45701

Phone (740) 597-3111
Fax   (740) 597-1548

www.third-sun.com


End of RE-wrenches at topica.com digest, issue 1520
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.729 / Virus Database: 484 - Release Date: 7/27/2004

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Save up to 67% on Omaha Steaks + Get 6 FREE Burgers and a 
FREE Cutlery Set + Cutting Board!
http://click.topica.com/caacpgjbz8Qcsbz9JC9f/OmahaSteaks
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------