Submersible pump loads? [RE-wrenches]

[RE wrenches]

I know that there is no typical household (water use) and no typical well
(head) and no typical pump (efficiency) but I am curious what off grid
wrenches are using for well pump loads in their load analysis?  Today's
project is a single person house with 400' head - looking at SQ with 240V
T-former...  I may even rig a little plug/cord so I can leave a $35
Kill-A-Watt meter there (rather than my fluke and an amp clamp) to get some
averaged real data...  but here's hoping that some of you already have this
info!

Sincerely,

Geoff Greenfield
NABCEP Certified Solar PV Installer TM
GLREA Certified Photovoltaic Systems Integrator/Installer License Number
0211-01

THIRD SUN SOLAR AND WIND POWER Ltd.
340 West State Street, Unit 25
Athens, OH 45701

Phone (740) 597-3111
Fax   (740) 597-1548

www.third-sun.com

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://lists.topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------