FX2024 Grid-Tie listing. [RE-wrenches]

[Bob-O Schultze, Electron Connection]

<x-flowed>
Christopher,
Looks like a Hi-Pot failure to me! ;)

>Hey John (and all the wrenches still out there...)
>
>The testing is going well - we were hoping we would have it all done
>this week as a Christmas present - but it looks like we might have to
>test on Monday of next week... The testing takes a lot of time -
>especially since we are certifying four models at the same time (sealed
>/ vented - 24 & 48 vdc). 
>
>We also have nailed down the program and cost for upgrading an existing
>FX or VFX inverter to the Grid-Tie version.  Contact us here at OutBack
>for the details.  We will have it on the website in a few days but all
>of our resources are currently focused on finishing up the testing...
>
>And for those interested - here is some video of one of utility
>interactive tests being conducted... be sure your speakers are turned on
>and the volume is turned up to get the full effect.
>
>http://www.mikeholt.com/img/mojonews/LugoSWR-56K.ram

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------




</x-flowed>