24VDC Power Supply [RE-wrenches]

[Darryl Thayer]

HI DAvid
I have used a similar product from solar converters. 
this device was a input of 17 to 60 volts and a
regulated output.  When i got the device I ordered the
specific voltage output.  It seemed that it could
select any output voltage I wanted. in this case it
was 120 vdc.  the DC out has a lot of ripple, which
did not bother me.  In your case you could use
capacitors and a three terminal voltage regulator. I
would guess that Solar converters could put that
together for you.

I know them quite well and will ask and if this is one
they can do will e-mail you off line. 

DArryl 

--- "David Palumbo, Independent Power & Light"
<ipl at sover.net> wrote:
> I'm looking for a power supply/controller/converter?
> for a LP boiler.
> 
> Will supply this device with 24vdc system power
> (anywhere from 23.5 to 31
> volts dc) and want to have 23.5 to 24.5 volts dc
> regulated power to feed the
> boiler. The draw is minimal, 2 amps at most.
> 
> I think that I used a Zane device to accomplish a
> similar goal years ago
> with mixed results. The Zane regulated the voltage
> well, but put out a lot
> of noise onto FL lights.
> 
> What else works well for this today?
> 
> Thanks and Happy Holidays,
> Dave
> 
> - - - -
> To send a message: RE-wrenches at topica.com
> 
> Archive of previous messages:
> http://www.topica.com/lists/RE-wrenches/
> 
> List rules & etiquette:
> http://www.mrsharkey.com/wrenches/etiquete.htm
> 
> Check out participant bios:
> www.mrsharkey.com/wrenches/index.html
> 
> Hosted by Home Power magazine
> 
> Moderator: michael.welch at homepower.com
>
> 
> 


__________________________________
Do you Yahoo!?
New Yahoo! Photos - easier uploading and sharing.
http://photos.yahoo.com/

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------