S&M in America/Sunny Boys on parade [RE-wrenches]
Dean T. Newberry
deant at dcn.org
Sun Nov 23 13:53:46 PST 2003
<x-flowed>
Hi Marco,
If there airconditioners in your area, then put it on the west side, to
reduce the air pollution a fraction.
Kurt Albershardt wrote:
> --On Friday, November 21, 2003 9:41 PM -1000 marco mangelsdorf
> <marco at pvthawaii.com> wrote:
>
>>
>> An east-west roof at a shallow pitch, say 20 degrees or
>> less. Two series strings of modules on a SB 2500. Neither east or west
>> roof is favored in terms of better sun-hours. The choices: both series
>> strings on the same plane or split 'em--one on the east and one on
>> the west
>> pitch? And no, getting two smaller Sunny Boys is not an option.
>
>
>
> Any difference in premium sun-hours WRT existing or possible future
> time-of-day metering? Check the commercial tariffs if you need
> guidance there, usually leaning towards afternoon production in a warm
> climate.
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
>
>
>
>
>
>
>
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list