Robust battery [RE-wrenches]
Dan Duffield
dand at directpower.com
Fri Nov 7 22:05:26 PST 2003
<x-flowed>
I failed to mention a significant disadvantage of the sealed AGM battery:
it is - the lower end of charge regulation setpoint 14.1 for an AGM means
that the mismatch that exists between the peak power point of most pv
panels (apprx. 17. vdc a la 12vdc system) is greater when charging a AGM
than when charging a wet lead acid 14.7-14.9. This means that without a
MPPT tracker there is a small but significant efficiency advantage using a
wet lead acid with a dumber PWM controller - which are abundant and the
norm. BTW my Lab can rip a historically bad one occasionally.
Ay ya
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list