Piezo sparking stove [RE-wrenches]

[Matt Tritt]

Have you tried running the ignitors on straight generator power? If you
have a genset that puts out good power, then it has to be a faulty
ignitor.

Matt T

-----Original Message-----
From: Ezra Auerbach, DragonSun Consulting [mailto:ezra at lasqueti.net] 
Sent: Monday, September 29, 2003 5:55 PM
To: RE-wrenches at topica.com
Subject: RE: Piezo sparking stove [RE-wrenches]


My JennAir makes has a similar problem on a one of its four burners,
doesn't seem to be associated with one particular inverter as I have the
revolving door installation up here. One burner clicks like heck until
the flame is turned down to about half strength, it causes others to
click at the same time.  The other burners work just fine.  Results
haven't varied between SW Plus, SW and Outback inverters, don't think
the problem went away when we had a Prosine for a couple of weeks.

Ezra

-----Original Message-----
From: Allan Sindelar [mailto:allan at positiveenergysolar.com] 
Sent: Monday, September 29, 2003 5:32 PM
To: RE-wrenches at topica.com
Subject: Re: Piezo sparking stove [RE-wrenches]


It seems that this is not a one-time occurrence. Has anyone contacted
Peerless about this? Allan

----- Original Message ----- 
From: "Jon Hill, Sierra Solar Systems" <solarjon at netshel.net>
> I have the same stove and am grid-connected with a SW4024. My stove
> still occasionally sparks like the one mentioned, for no apparent 
> reason. There is no way to reset the stove. (Even turning off the 
> breaker won't stop the sparking after turning it back on). My only 
> solution has been to let it keep sparking till it stops, which can 
> take 15 minutes or more. Even though we've sold some of these stoves, 
> I'm not very pleased with mine. Does anyone know of another brand 
> without a glow bar?

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------