RE; Breaker hold down kit [RE-wrenches]

[William Miller]

Try this link:

http://www.electricsupplyonline.com/_details.php?c=lx387hd_circuit_breakers-
murray&item=W004240





At 11:00 PM 9/4/2003 -0700, you wrote:
>
>
>
>
>
>I was wondering if anyone on the wrenches list might know where I can find
a hold
>down kit for a Murry 15 amp 2 pole circuit breaker as required in NEC article
>408.16 F.
>I have tried all my local sources and the only thing I could find was a small
>plastic
>clip that only works for breakers over 70 amps. My inspector wants to see any
>back fed circuit breaker such as with a grid tie PV system held in place
>.
>It seems to me that NEC article 408.16 F was not written with grid tie
inverters
>in mind because as soon as you disconnect the circuit breaker the inverter
stops
>powering the breaker anyway.
>
>Thanks
>
>Vince McClellan
>
>- - - -
>To send a message: RE-wrenches at topica.com


__________________________________________________________________
William Miller
Miller Power and Communications
PO Box 50, Santa Margarita, CA 93453
Voice :805-438-5600     Fax: 805-438-4607	
email: wrmiller at slonet.org
http://millerpowerandcomm.com
License No. C-10-773985
_____________________________________________________________
Compatibility:
Word processor: WP10
Spreadsheet: Quatro Pro 10
CAD: Microstation 95, DXF, Visio 4.1T
_____________________________________________________________
"Every decent man is ashamed of the government he lives under."
                                    H. L. Mencken
__________________________________________________________________

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------