ballast pans [RE-wrenches]

[ASAP POWER!]

The other question is:  how much tilt are you talking about?  The FS systems
have a 5 degree pitch to their frame pan/ballasts in which the modules slide
into.  If you want the full on tilt for Vermont latitude, these probably
won't be your answer.

Peter D
ASAP POWER!/1AU, Inc.

-----Original Message-----
From: matthew tritt [mailto:solarone at charter.net]
Sent: Thursday, July 24, 2003 3:24 PM
To: RE-wrenches at topica.com
Subject: Re: ballast pans [RE-wrenches]


Kirk,

Schott has a nice system, but I don't know about the increased roof loading.

Matt T
----- Original Message -----
From: "Kirk Herander, VSE" <kirk at vtsolar.com>
To: <RE-wrenches at topica.com>
Sent: Thursday, July 24, 2003 3:15 PM
Subject: ballast pans [RE-wrenches]


> Group,
> Are there any good systems out there to ballast a tilted roof-mount array?
I
> have to avoid penetrating a flat roof on a commercial building.
>
> thanks, Kirk
>
> Vermont Solar Engineering
> a Xantrex / Trace Certified Dealer Charter Member
> Kirk Herander
> PO Box 697
> Burlington, VT. 05402
> www.vermontsolar.com
> www.backeastsolar.com
> 800.286.1252 - 802.863.1202
> fax 802.863.7908
>
> - - - -

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------