Grid-tie/backup inverter status [RE-wrenches]

[Bob-O Schultze, Electron Connection]

<x-flowed>
Dave,
Latest word I heard on that is they are upgradeable, but it may take 
a trip back to the factory. You could it yourself with a board swap 
and flashing of your Mate's software, but Outback needs to meet some 
UL rules which may require a voyage on the brown land yacht.
Bob-O


>Is it possible to update the present models of Out Back FX's to grid-tie
>approved models with a board swap?
>Dave
>

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================


</x-flowed>