SMA with ground fault signal [RE-wrenches]

[Jason Fisher]

Check the fuse. I hope you have spares with you since they take time to get!

On this note, I had an experience where I shut down three SB-2500s to
relocate the conduit run since the owner changed their mind and when I
started them all up again, I had two units whose fuse was blown. Anybody
seen this? I thought I'd done the proper shutdown and startup steps but who
knows, it was a hot day! Does anyone know what could cause this fuse to blow
other than a + to ground fault (which of course there was not)?

Jason Fisher
Owner

Aurora Energy LLC
P.O.Box 3315
Annapolis, MD 21403

voice / fax: 410-268-3684
email: jason at aurora-energy.com
web: www.aurora-energy.com

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================