Mating an FX inverter to a Brand X disconnect [RE-wrenches]

[William Miller]

Phil:

When I visited the Outback offices, I expressed my dismay in person that
the KOs were too far away from the back plane.  Using off-the-shelf
components, where appropriate, is one way to reduce installation material
costs.

William Miller


At 06:09 PM 6/4/2003 -0600, Phil Undercuffler, Positive Energy wrote:
>Anybody thought up a good way to mate an FX inverter to a Trace DC
>Disconnect in a code compliant manner?  The FX-DCA terminates too far away
>from the back plane to ever line up, apparently even with an offset nipple.
>Using 2" metal flex would require the inverter to be mounted at least a foot
>or so away from the disconnect (use 2 2" flex 90s and doing a cross-over
>from high inverter to low KO?  That's a spendy proposition, and only
>possible with single inverter systems)
>
>What is the best upgrade path for those clients with Trace or Class R fused
>disconnects?
>
>Phil Undercuffler
>Positive Energy
>phil at positiveenergysolar.com
>

__________________________________________________________________
William Miller
Miller Power and Communications
PO Box 50, Santa Margarita, CA 93453
Voice :805-438-5600     Fax: 805-438-4607	
email: wrmiller at slonet.org
http://millerpowerandcomm.com
License No. C-10-773985
_____________________________________________________________
Compatibility:
Word processor: WP10
Spreadsheet: Quatro Pro 10
CAD: Microstation 95, DXF, Visio 4.1T
_____________________________________________________________
"Every decent man is ashamed of the government he lives under."
                                    H. L. Mencken
__________________________________________________________________

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================