Water Miser Caps venting water [RE-wrenches]
Nick Nicholas, APS
APS at SBCGLOBAL.NET
Fri Jun 6 19:56:24 PDT 2003
Gary:
Overfilling seems to be the most common cause for moisture on the top of
batteries, but what you described sounds more like condensation. C&D
Industrial Batteries all come with Water Misers installed, and we have many
out in the field with no problems noticed.
Nick Nicholas
Nick Nicholas
Chief of Engineering
Alternative Power Systems, Inc.
135 Colfax Ave. Grass Valley CA 959545
530-274-0588 530-274-0589 530-913-5605
aps at sbcglobal.net alternativepowersystems.com
Add this card to your address book
Alternative Power Systems
www.alternativepowersystems.com
aps at sbcglobal.net
135 Colfax Ave.
Grass Valley, CA 95945
(530) 274-0588 phone
(530) 274-0589 fax
----- Original Message -----
From: "Gary Higbee" <gary at windstreamsolar.com>
To: <RE-wrenches at topica.com>
Sent: Tuesday, June 03, 2003 9:52 PM
Subject: Water Miser Caps venting water [RE-wrenches]
> Wrenches,
>
> Is it normal for Water Miser caps (or Hydro Caps) to vent water out of the
> top? I've seen water pooling on top of my client's batteries, and we're
both
> wondering if this is normal (my client thinks not, and believes the caps
may
> have gone bad). You may be wondering what the bulk and float voltages are.
> My client's nominal 24-volt IGB's run around 29.2 and 26.4 volts
> respectively.
>
> I don't have experience with these caps, and only know that my own ancient
> T-105's (no caps) do frequently have water on the top. I wipe 'em off and
> fill 'em up now and then.
>
> Thanks,
>
> Gary
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Gary Higbee (gary at windstreamsolar.com)
> (541 )607-1818 (Eugene)
> (541) 954-3881 (Cell)
> Solar, wind, and hydro site analysis and system design
> Components dealer and installation assistance
> ~ WindStream Solar (www.windstreamsolar.com) ~
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
>
----------------------------------------------------------------------------
----
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================
More information about the RE-wrenches
mailing list