Design efficiencies (was: cost per kWh) [RE-wrenches]

[Don Loweburg, Offline]

In a message dated 06/02/2003 10:06:59 AM Pacific Daylight Time, 
allan at positiveenergysolar.com writes:

> where we have gotten
> the 80-85% battery efficiency figure that most of us use

Alan, The AH efficiencey is higher than energy efficiency. Since for me these 
systems must be measured on the basis of KWH in vs KWH out , I think the 
energy efficiency is the way to go. From a sales point of view these numbers 
sometimes disappoint. But this is what distinguishes a good wrench from the sales 
goons on the internet.

Don

--
[Non-text portions of this message have been removed]

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================