cost per kWh [RE-wrenches]
Don Loweburg, Offline
i2p at aol.com
Mon Jun 2 10:04:29 PDT 2003
In a message dated 06/02/2003 9:16:38 AM Pacific Daylight Time,
remotech at taosnm.com writes:
> Don does your 50% factor add a fudge factor for customers' loads not
> accounted for in the original design, or are there losses I'm not properly
> accounting for?
>
Yes Ray, it is a very loose first approx that I use and does allow for
unaccounted load. I need to tell the full story here. I always follow up with a
profile using Maui Solar software. Not sure of the programs actual name. Using the
software and good load info I do usually come close to the figures that you
and Joel use. Good sizing is important, I know, as price is always a factor. On
the other hand, I have never had a customer complain because they had too
much power.
Best, Don
--
[Non-text portions of this message have been removed]
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================
More information about the RE-wrenches
mailing list