Outback 48V/ Intertie? [RE-wrenches]
Christopher Freitas - OutBack Power
cfreitas at outbackpower.com
Fri May 16 10:51:14 PDT 2003
Jeff Clearwater wrote:
> If we quote and/or install a unit now, can we also promise our
> customers an upgrade path to intertie? Can that be priced now? Is
> it just a board change out? Mate software upgrade? What will that
> look like?
There absolutely will be an upgrade path for the existing units - both
24 and 48 vdc models. It is basically a software upgrade... but... due
to the UL/utility mindset - we will do it by shipping a swap-out unit to
you the dealer to exchange with the old one. The issue for them is that
the complete inverter has to go through the production line test setup
that has the official blessing on it - testing the computer board itself
is not apparently enough...
As far as the upgrade cost - it will be as cheap as possible. We are
working on an upgrade program summary - I will post regarding it here on
the wrenches list once we are certain of the co$t etc.
> Thanks again and congrats on the successful launch of Outback!
The thanks should actually be from all of us here at OutBack to all of
those who have supported (and tolerated) us during this start-up phase
;)
Christopher Freitas
OutBack Power Systems, Inc.
cfreitas at outbackpower.com www.outbackpower.com
Tel 360 435 6030 Arlington WA USA
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================
More information about the RE-wrenches
mailing list