Depth to bury PVC conduit [RE-wrenches]

[Jeff Clearwater]

<x-flowed>
Or unless you use Rigid Metallic.  expensive!

>AJ,
>18" is Code unless your run crosses a road or driveway. then it's 24".
>
>>Hello-
>>Does anyone have a recommendation as to how deep to bury 1 1/2" PVC
>>conduit from an array to a LB at the house 100' away?  The soil is a
>>silty clay and it is at least 8' to bedrock.  Thanks.
>>
>>ciao,
>>aj
>>
>>Senior Engineer
>>Draker Solar Design, LLC
>>www.drakersolar.com
>>aj at drakersolar.com
>>802 238-8648
>>
>
>- - - -
>To send a message: RE-wrenches at topica.com
>
>Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
>List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
>Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
>Hosted by Home Power magazine
>
>Moderator: michael.welch at homepower.com
>


-- 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Jeff Clearwater
Ecovillage Design Associates - Whole Systems Design
Community and Village Scale Renewable Energy & Water Systems

Cell: 720-480-8455
Office:  866-480-8455
Fax:  720-528-7813
jeffc at ic.org

85 Baker Road
Shutesbury, MA 01072

PO Box 764
Boonville, CA  95415


Council Member - Ecovillage Network of the Americas - http://www.ecovillage.org
Advisory Board - Living Routes - Ecovillage Education - 
http://www.livingroutes.org
Founder:  Ecovillage Research, Development, and Demonstration Program:
http://www.home.earthlink.net/~clrwater/RDD/rdd.html
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================

</x-flowed>