Uplift Wind Loading Values [RE-wrenches]

[Hugh Piggott]

<x-flowed>
I have used 5/16 all-thread inserted into 1/4" holes in wooden 
purlins using a cordless drill as driver, holding the rod in the 
chuck.  In the case of metal purlins you could drill and tap the 
metal for a very secure attachment.
-- 
Hugh

in Stornoway
hugh at scoraigwind.co.uk
http://www.scoraigwind.co.uk/

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================

</x-flowed>