pole mount 150 watt modules [RE-wrenches]

[matthew tritt]

Keith,

I've had great success with the new Wattsun AZ300 dual axis tracker. They
will definitely stand-up to very high winds, you build them AFTER the pole
is up (I use a big iron weld flange at ground level to avoid the humungous
piece of 8" pipe required) and, of course, they track like they're glued to
the sun!
Since they will handle up-to 12 Sharp 165's, you shouldn't have a problem.

Only thing is, you'll need a bunch of money, a bunch of guys and a bunch of
redi-mix.

Matt T
----- Original Message -----
From: "keith" <kcronin at lava.net>
To: <RE-wrenches at topica.com>
Sent: Thursday, February 20, 2003 10:03 AM
Subject: RE: pole mount 150 watt modules [RE-wrenches]


> Hello Jay
>
> I was envisioning using a bucket truck to set the poles in concrete and
> a bucket truck to install the arrays.
> I recall back in 96 when I did an SEI education/charity project in North
> Carolina that we used a pickup truck and a lot of humans. Getting that
> array on the gimbal was a dangerous event. And that was before the 150
> watt panels came on the scene!
>
> Keith Cronin
> Island Energy Solutions
> 318 A Kuulei Road
> Kailua, Hawaii 96734
> 808-262-3268 Tel
> 808-263-0338 Fax
> www.islandenergy.net
>
>
>
> -----Original Message-----
> From: Jay Peltz, Peltz Power [mailto:jay at asis.com]
> Sent: Thursday, February 20, 2003 5:08 AM
> To: RE-wrenches at topica.com
> Subject: Re: pole mount 150 watt modules [RE-wrenches]
>
> HI Keith,
>
> I just installed a 8 panel shell 150's.  6" pole.  You'd better have a
> bunch
> of strong guys to move that 8" pole.
>
> jay
>
> peltz power
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
>
>
>

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================