SW4024 and Piezo Igniters [RE-wrenches]

[Don Loweburg, Offline]

In a message dated 01/07/2003 9:37:20 AM Pacific Standard Time, 
jeff at globalresourceoptions.com writes:

> On a related topic, this same genny has gotten into a habit of disconnecting
> during charging, turning off, and then restarting and reconnecting
> automatically

Jeff, I too experience this with my Onan. I have been able to graph the 
charger output during these events. For me it always began during the last 
1/3 third of the charge cycle. Sometimes output wanders but things stay in 
sync while at other time we disconnect and reconnect. I think it is a battle 
between the onboard gen regulator  and the inverter output. I have simply 
lived with it but welcome any solution you may find.

Best, Don Loweburg

--
[Non-text portions of this message have been removed]

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================