Solar Arrays. [RE-wrenches]
Dean T. Newberry
deant at dcn.org
Mon Dec 1 21:23:42 PST 2003
<x-flowed>
Hi Carl,
What you want to do is increase the emissivity of the back of the panel.
Shiny stuff like alluminum foil and hi gloss paint have low emissivity.
Dull stuff like flat latex has high emissivity.
Color doesn't matter.
The rubber sheet on the back of the modules is probably in the middle to
high end of the emissivity range.
I think it would be difficult to get flat paint to adhere to the rubber
and stay there for 25 plus years.
When possible I mount PV over pool panels. Leaving 4" for ventilation
the same as a plane fo roof mount. We estimate 30% shading losses, so
add a panel or two to the pool heating to get the required insolation
for that system.
cul deant
Carl Emerson, Free Power Ltd. wrote:
> Hi there,
>
> I am interested to know if there is thought to be any advantage in
> painting the back of solar modules black.
>
> My idea is to lower the panel temperature by increasing the radiant
> heat and lowering the cell temperatures.
>
> Is my logic flawed ?? Most of the modules are light in colour on the
> back.
>
> Thanks
>
> Carl Emerson
> Free Power Ltd.
> Auckland NZ
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
>
--
* Cooperative Community Energy* *Dean T. Newberry*
430 D Street, Davis CA, 95616
Tel: 530 758-6064
Fax: 530 758-3684
Email: deant at dcn.org
Web: CCEnergy.com
Talbott Solar <http://www.dcn.davis.ca.us/go/deant/>
Contr. Lic. # B-667908
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list