Battery Charger Options [RE-wrenches]
Doug Pratt
dmpratt at sbcglobal.net
Sun Nov 30 10:04:00 PST 2003
Iota can only give about a 0.8v spread between their hi and lo voltage
set points. So we offer hi-volt and lo-volt models at each amperage.
Choose according to what you're doing. Here's details (this is NOT a
sales solicitation, only for information):
http://www.realgoods.com/renew/shop/product.cfm?dp=1503&ts=2015791&kw=Io
ta
-Doug
-----Original Message-----
From: Kurt Albershardt [mailto:info at es-ee.com]
Sent: Sunday, November 30, 2003 9:47 AM
To: RE-wrenches at topica.com
Subject: RE: Battery Charger Options [RE-wrenches]
Good info, thanks. Do you order them for 13.6 float with 15.5 bulk,
then?
--On Sunday, November 30, 2003 9:44 AM -0800 Doug Pratt
<dmpratt at sbcglobal.net> wrote:
> The Iota chargers DO go to 15.5 volts. It's one of the standard
voltage
> settings we offer on the 30, 55, and 75 amp models. We special order
> them set up that way from Iota. Have been selling them that way for
fast
> generator-based charging for 4-5 years. No problems.
> Best regards,
> Doug Pratt
> Real Goods Technical Editor
>
> -----Original Message-----
> From: Kurt Albershardt [mailto:info at es-ee.com]
> Sent: Saturday, November 29, 2003 3:51 PM
>
> I've never cranked up one of the Iota DLS Series units to see how high
> they'll go (there is an adjustable pot inside), but in terms of
> bang-for-the buck DC supplies they're hard to beat
> <http://www.iotaengineering.com/dls.htm> 15, 30, and 45 Amp models are
> priced within a few dollars of each other.
>
> Modifying current output on these requires changing (and matching)
> several low value resistors on the boards, IMO not worth the trouble.
>
> Call Don at Iota and ask if they'll get to 15.5 Volts.
>
> - - - -
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list