MPP and battery charging. [RE-wrenches]
Christopher Freitas - OutBack Power
cfreitas at outbackpower.com
Fri Jun 20 11:54:55 PDT 2003
Darryl Thayer wrote:
> The 3000 watt system is charging through 3 RV products MPPTs. There is
> no link between these controllers, could it be that the controllers do
> not work well when in parallel without master slave relation? And can
> the MX60 work with other MX60?
Yes - multiple OutBack MX60s will work together "out of the box" without
any special wiring or master slaving required. We considered a
requirement for the design from day one. We also worried a lot about
working with multiple C40s, SW inverters - and yes - even on systems
with mixed MPPT controllers.
Requiring inter-communication, special wiring, external shunts etc. for
the MPPTs to work together is a band-aid to underlying problems. If it
is designed correctly from the start it simply is not necessary or
desireable. Inter-communicating should be used to improve the operation
(such as allow easy viewing of the meters or a single temp sensor
coordination) but should not be required for proper operation together.
A system should still operate correctly with the communication not
functioning when possible.
Making system "communicate" is not the "holy grail" or some ultimate
solution - it can actually just result in more problems if not done
correctly. Making products that work together properly under a variety
of conditions is the best solution. Having separate communication
systems for the charge controllers and the inverters sounds like a real
mess to me.
Christopher Freitas
OutBack Power Systems, Inc.
cfreitas at outbackpower.com www.outbackpower.com
Tel 360 435 6030 Arlington WA USA
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================
More information about the RE-wrenches
mailing list