wire type [RE-wrenches]
Christopher Freitas - OutBack Power
cfreitas at outbackpower.com
Mon May 12 14:33:48 PDT 2003
Jay - The Cobra wire is approved for use as you describe. I have seen
many large UPS AC bypasses wired with it for the very reasons you
mention - easy to bend and fit.
Just be sure the voltage rating on the wire meets your application.
Christopher Freitas
OutBack Power Systems, Inc.
cfreitas at outbackpower.com www.outbackpower.com
Tel 360 435 6030 Arlington WA USA
>jay peltz wrote:
>
>
> HI All,
>
> I need to install a manual bypass for a customer. Can I use wire like
> Cobra wire 2/0? It would make it way easier to work the wire instead
> of #2/0 THWN. Any problems with code?
>
> thanks,
>
> jay
>
> peltz power
>
>
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================
More information about the RE-wrenches
mailing list