Learning about Direct Coupling [RE-wrenches]
Brad Bassett
bsbassett at earthlink.net
Tue Apr 15 13:09:05 PDT 2003
Mark,
My understanding is that NexTek has a controller/inverter they use for
the interface with the grid power. I would just ask them.
Brad
Mark Robinson wrote:
> I need to become an 'instant expert' on Direct Coupling of PV to
> lighting
> loads in commercial buildings. Has anybody had any experience with this?
> Anybody want to learn with me?
>
> NexTek Power creates an AC/DC ballast that powers flourescent lighting
> on AC
> or DC.
>
> Efficiency Concerns: No Inverter increases efficiency. Getting power
> from
> the panels at low light, before an inverter would kick on. More
> efficient
> ballasts. What kind of low power losses are we seeing in panels before
> the
> inverter comes on?
>
> Installation Concerns: No Grid-tie approvals. What about DC wiring? DC
> switching?
>
> Other concerns?
>
> Will welcome any feedback on or off-list.
>
> Thanks,
> Mark Robinson
> The Energy Grid
> Mark at TheEnergyGrid.com
>
>
>
Brad Bassett
Schott Applied Power
Tumwater, WA office
bsbassett at earthlink.net
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================
More information about the RE-wrenches
mailing list