Dual Windseeker 503 Wirerun [RE-wrenches]

[sunwise]

Greetings Travis and Matt,

I may be going out onto an unqualified limb here, but isn't the
Windseeker a wild three phase ac machine while the Air is a two wire DC
machine (or rectified inside the machine).  

If the Windseekers are indeed putting ac out, I can't imagine them
sharing the same conductors unless they are rectified to DC at the base
of the tower.

Kurt Nelson

-----Original Message-----
From: matthew tritt [mailto:solarone at charter.net] 
Sent: Thursday, April 03, 2003 11:18 AM
To: RE-wrenches at topica.com
Subject: Re: Dual Windseeker 503 Wirerun [RE-wrenches]

Travis,

Where is/are the controller(s) in this mix? Are both turbine outputs
connected to the same controller input?
Is whatever controls this system located at the tower or at the battery
bank? I remember that Air turbines hooked-up in tandem suffer from some
kind
of psychotic break because of conflicting control issues. :-)
Could this also be the case with the AIR, since both are hatched from
the
same nest (so to speak)?

Might it be possible to sell them one, more appropriate turbine?

Matt T
----- Original Message -----
From: "Travis Creswell, Ozark Solar" <ozsolar at ipa.net>
To: "RE-wrenches" <RE-wrenches at topica.com>
Sent: Thursday, April 03, 2003 7:39 AM
Subject: Dual Windseeker 503 Wirerun [RE-wrenches]


> Hello All,
>
> I've inherited a installation with two Windseeker 503's.  Currently
the
> output of both turbines is combined at the base of the 40' tower that
they
> both are on about 40' from mature oak trees.  That should give you
idea
> about the rest of the system.  Yes, I've already suggested installing
a
> taller tower but ....
>
> The combined output goes to the battery bank a little over a 100'
away.
Can
> this cause problems?  Should each turbine be on a dedicated run all
the
way
> to the battery bank?
>
> Thanks in advance.
>
> Travis Creswell
> Ozark Energy Services
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
>

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================