Energy efficient pumps. [RE-wrenches]

[John Berdner]

John:

A while ago I was at a Dealer seminar held by Dankoff Solar.
Allan at +E was there but I do not think he made the presentation.
Unfortunately I do not recall the name of the guy who did - sorry.
You might try giving Dankoff a call if Allan or others do not remember.

If you have any questions or if I may be of any further assistance,
please do not hesitate to contact me.

Best Regards,

John Berdner

SMA America, Inc.
12438-C Loma Rica Road
Grass Valley, CA  95945
530.273.4595 - Tel
530.274.7271 - Fax



-----Original Message-----
From: sunwise [mailto:sunwise at cheqnet.net] 
Sent: Monday, March 03, 2003 03:37 PM
To: RE-wrenches at topica.com
Subject: RE: Energy efficient pumps. [RE-wrenches]

John, let me know if I am wrong here, but wasn't it Allan at Positive
Energy that was putting together some high efficiency boiler/hydronic
heating systems.  I also remember those posts a while back and someone
had it all figured out -- Kurt

-----Original Message-----
From: John Blittersdorf, Cent. VT Solar & Wind [mailto:cvsolar at aol.com] 
Sent: Sunday, March 02, 2003 10:45 PM
To: RE-wrenches at topica.com
Subject: Energy efficient pumps. [RE-wrenches]

Group,
   Probably a year or so ago, someone in our group mentioned doing lots
of 
work coming up with energy efficient pumping designs... pumps, manifolds
etc. 
for radiant floor heating and/or baseboard hot water heat.  I would like
to 
contact that person as I am finding that pump loads are getting out of
hand 
with some of my off grid systems... It seems that plumbers think that a
whole 
wall full of pumps is normal!!!!
I think that 500 to 600 watts to move a little water around is too much.
I 
know that the ELCids can be used in some applications but would like to
know 
what other pumps are available. Any info would be appreciated.

John Blittersdorf
CVSolar
213 N.Main St.
Rutland, VT 05701

--
[Non-text portions of this message have been removed]

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================