Fw: Another "NO-GO" Load for the Trace Sinewave [RE-wrenches]
Allan Sindelar
allan at positiveenergysolar.com
Tue Oct 21 21:24:46 PDT 2003
This posted for John Wiles:
> Bought an Arrow ETF50 electric stapler and brad nailer for some
> screen and chair upholstery work. Supposedly draws 10 amps. I noted
> poor performance in that the driving forces were not very high and
> did not give very good penetration at home on my off-grid RE system
> with the Trace SW4024.
>
> Took the stapler in to work and it performed well on the grid with
> both staples and brads.
>
> Wonder if the Outback or Beacon M5+ will be better? We seem to need
> in-cycle voltage regulation and surge sensing.
>
> Any experience with other inverters?
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list