Penetration free standing seam clamps [RE-wrenches]

[Nick Lucchese]

<x-flowed>

-- 
Greetings Wrenches,
  I'm quoting an installation to take place this fall and the 
owners/architects want to utilize the S-5 clamps available at 
lmcurbs.com. This system is new to me and I'm wondering if they can 
be adapted to accommodate the Unirac Solarmount rails. Is it possible 
to run the rails parallel to the seams with this system? It seems 
like a great system to avoid roof penetrations but also seems like a 
lot of extra drag on the roofing panels. Anyone have any hands on 
experience with this method?

   As always, thanks for any helpful insights any of you may have. 
Have a great day.

  Nick A Lucchese
  Sierra Solar Systems/Planet Home
  nickl at sierrasolar.com


  PS. If anyone thought it was important enough to go out and buy a 
torque driver to properly torque the Sunny Boy AC and DC terminals 
ignore the manual. 35 in. lbs will break the screw, the only torque I 
had success with was about 15 in.lbs. This misprint was confirmed by 
SMA but I have not seen it mentioned yet on the list.

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================


</x-flowed>