Isolating material [RE-wrenches]
Bruce Gardiner
brucegar at igc.org
Wed May 21 22:16:53 PDT 2003
Wrenches,
I will be bolting Professional Solar aluminum rails to galvanized Unistrut and would like to get recommendations on a suitable isolating material. Someone has suggested a thin sheet of polyurethane (1/4" is thinnest) or ABS (1/8" available). What do other wrenches use or recommend?
It seems impossible to avoid dissimilar metals touching at all points - I will have stainless bolts going into regular steel channel nuts and stainless washers sitting on aluminum rails -where does one draw the line? Thanks.
Bruce Gardiner
www.acmesolar.com
[Non-text portions of this message have been removed]
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================
More information about the RE-wrenches
mailing list