OutBack PS2DC [RE-wrenches]
Christopher Freitas - OutBack Power
cfreitas at outbackpower.com
Mon May 12 14:29:13 PDT 2003
> Do you know that Outback now has a 1/2 size PSDC?
>
> Todd
Since this was mentioned - the new smaller disconnect box is called the
"PS2DC" and there is also a new "PS2AC" enclosure was well. Both the DC
and AC boxes are the same size and measure 18.5" high x 11.5" wide and
is 9" deep.
The PS2DC holds two of the large 175/250 amp breakers - or - three 100
amp breakers - and up to eight of the small 1 to 60 amp breakers. All
breakers face forward. A positive terminal bus, negative bus and DC
shunt are included standard. The PS2s are designed specifically to
handle 1 or 2 OutBack FXs but other inverters can work with some on-site
knockouts etc.
They should be now in stock at all OutBack distributors.
Christopher Freitas
OutBack Power Systems, Inc.
cfreitas at outbackpower.com www.outbackpower.com
Tel 360 435 6030 Arlington WA USA
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================
More information about the RE-wrenches
mailing list