Windy Boy [RE-wrenches]

[jberdner at sma-america.com]

Wrenches:

Yes, the new turbine mode should work just fine with a hydro turbine
assuming the voltages were in the right range.  

Chris: Actually it rains quite a bit in Central Germany too so I think
we are ok ;-)

Also, the name Hydro Boy is already taken for our fuel cell inverters so
we are still trying to come up with a name for the micro hydro-electric
unit.  Clever suggestions for a name for the micro hydro unit are
welcome offline.

If you have any questions, or if I can be of any further assistance,
please do not hesitate to contact me.

Best Regards,

John Berdner

SMA America, Inc.
12438 Loma Rica Drive, Unit C
Grass Valley, CA  95945
530.273.4595 (voice)
530.274.7271 (fax) 


-----Original Message-----
From: Christopher Freitas - OutBack Power
[mailto:cfreitas at outbackpower.com] 
Sent: Thursday, November 21, 2002 11:20 PM
To: RE-wrenches at topica.com
Subject: RE: Windy Boy [RE-wrenches]


reidworth at aol.com wrote:
> Could Windy Boy become a Water Boy?  Is grid tie Micro Hydro a 
> possibility?

I think it should be called the "Rainy Boy" to keep to the theme...  But

then it would have to be built in the Northwest... 

Christopher Freitas
OutBack Power Systems, Inc.
cfreitas at outbackpower.com  www.outbackpower.com
Tel 360 435 6030  Arlington WA USA

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================